Side-Loading-case-packer-for-RSC.jpg

SIDE LOADING CASE PACKER FOR RSC: SB & SW

TOP 3 BENEFITS:

  • Direct access into the machine at floor level
  • Product retention zones minimized
  • Compact and ergonomic machine design 
  • Open All ▼

  • Product Information

    Technical characteristics

    • Compact layout and footprint.
    • Products fed in by single layer simple transfer or by a mechanical or servo-driven elevating or lowering stacker.
    • Forming, side loading and sealing on a single machine.
    • Stylish safety guarding offering maximum visibility inside the machine.
    • Case magazine height lowered to improve blank handling by the operator.

    Improved functionality

    • Cantilever design of the case transfer mechanism.
    • Retention zones minimised.
    • Maximum product tracing guaranteed.
    • Hygienic operating conditions.
    • Quick size changeovers.

    Performance

    • Speeds of up to 13.5 cases/min for the 2-station model and 20 cases/min for the 3-station model.
    • Products fed in by single layer simple transfer or by a mechanical or servo-driven elevating or lowering stacker.
    • Simplified format changeovers.
    • Product and case size ranges available on request.

    Options

    • Product and batch control by vision system.
    • Integration of the labeling operation.
    • For requirements in terms of speed and smooth handling, the loading operation can be carried out by a “Pick & Pack” gripper: 2-axis, 3-axis, 6-axis, or Scara.

  • SB Operation

    Product packing

    • Stocking of blanks in a flat magazine with motorized belt.
    • Extraction and presentation of the flat blank at the forming station by an arm fitted with suction cups.
    • Erection and squaring of the static case by rotating arm and lower support ramp.
    • Flap deflection and guiding of the batch of products into the case by rotating bridge and loading funnel.
    • Motorized transfer of the batch into the case.
    • Pre-folding of the long flaps whilst case is stationary, followed by progressive folding during transfer

    Hot-melt version

    • Motorized transfer of the cases (held square) by mechanical shuttle with speed control for even application of glue strips.
    • Case halted at the pressing station by upper stop.
    • Pressure applied evenly to case sides to ensure gluing and squaring of the case prior to outfeed.

    Adhesive tape version

    • Motorized transfer of the cases (held square) by mechanical shuttle.
    • Positive transfer of the case by motorized belts for sealing by applying adhesive tape.

  • SW Operation

    Product packing

    • Stocking of blanks in a flat magazine with chains advancing mechanically and guide to maintain stability.
    • Positive case extraction and forming (patented system) by two rotating arms fitted with suction cups.
    • Flap deflection and guiding of the batch of products into the case by rotating bridge and loading funnel.
    • Motorized transfer of the batch into the case.
    • Folding and holding of the inner flaps.
    • Pre-folding of the long flaps whilst case is stationary, followed by progressive folding during transfer.

    Hot-melt version

    • Motorized transfer of the cases (held square) by mechanical shuttle with speed control for even application of glue strips.
    • Pressure applied evenly to case sides to ensure gluing and squaring of the case prior to outfeed.

    Adhesive tape version

    • Motorized transfer of the cases (held square) by mechanical shuttle.
    • Positive transfer of the case by motorized belts for sealing by applying adhesive tape.

  • Open All ▼

 Side loading case packer : SB

Side loading case packer : SB

Watch video here
Side loading case packer for RSC and/or Wrap around Cases/Trays : SW

Side loading case packer for RSC and/or Wrap around Cases/Trays : SW

Watch video here